No Show Diagonal Mesh Embroidery Stabilizer

How to use No Show Diagonal Mesh Embroidery Stabilizer:

1. Cut a piece of the embroidery stabilizer at least one inch larger than the hoop
   
2. Hoop the embroidery stabilizer to the back of the garment. When finished with the embroidery remove any larger areas of the mesh cutting to form rounded corners close to the design. If using the fusible version, after trimming close, refuse from the backside using a pressing cloth.
   
3. Add a tearaway for extra definition if desired. After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
   
4. If it is a VERY dense design or above 20,000 stitches - use 2 layers of mesh criss-crossing the embossing patterns creating a perfect stability for those more dense designs.
   

How to use No Show Diagonal Mesh Fusible Embroidery Stabilizer:

1. Cut a piece of the embroidery stabilizer at least one inch larger than the hoop
   
2. Fuse the embroidery stabilizer to the back of the garment. - use a low iron 260F setting
   
3. Hoop it and add a tearaway for extra definition. After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
   
4. If it is a VERY dense design or above 20,000 stitches - use 2 layers of mesh cris -crossing the embossing pattern.
5. When your are finished stitching - re fuse- the edges - peel them back and trim.
   

No Show Diagonal Mesh Embroidery Stabilizer is available in several roll sizes and colors:
Click here to visit our web store and purchase No Show Diagonal Mesh by the roll

No Show Diagonal Mesh Embroidery Stabilizer is available in black or white 7.5" x 8" pre cuts:
Click here to visit our web store and purchase No Show Diagonal Mesh pre-cuts

No Show Diagonal Mesh Fusible Embroidery Stabilizer is available in several roll sizes:
Click here to visit our web store and purchase No Show Diagonal Mesh Fusible by the roll

No Show Diagonal Mesh Fusible Embroidery Stabilizer is available in white 8" x 8" white precuts:
Click here to visit our web store and purchase No Show Diagonal Mesh Fusible pre-cuts