Wash Away Embroidery Stabilizer Directions:
Please test thoroughly prior to beginning any project.

1. Before handling Wash-Away, be sure that hands and work area are completely dry.
   
2. Cut Washaway slightly larger than the hoop with about 1 inch extra all around.
3. Hoop one layer of the embroidery stabilizer as tightly as possible. You want to achieve a tambourine-skin type tension in the hoop.
4. Hoop the embroidery stabilizer with the fabric.
5. Embroider your design.
6. Trim away the excess embroidery stabilizer.
7. Rinse away excess embroidery stabilizer using room temperature water. Tap water is fine.
   How much you rinse depends on the desired effect you want. The more you rinse, the softer the embroidery becomes.

Wash Away Embroidery Stabilizer is available in several roll size
Click here to purchase Wash Away on the roll

Wash Away Embroidery Stabilizer is available in 7.5" x 8" white pre cuts
Click here to purchase Wash Away pre cuts